 |
| Quantity: | |
|---|---|
Rear fender flare R and L
Product profile
The golf cart rear hood seat component rear fender flare is a dedicated protective and structural accessory. It's designed to attach to the side of t rear fender flare he rear hood seat assembly—covering the upper and outer edge of the rear wheel well. This component bridges the gap between the rear hood seat and the rear wheel, shielding both the cart's body and passengers from debris while complementing the rear hood seat's design. Unlike generic fender flares, it's tailored to the contours of rear hood seat assemblies, ensuring a seamless fit that doesn't disrupt seat folding or hood operation.
I. Product Features
1.Durable & Impact-Resistant Material
Made of high-density polyethylene (HDPE) or ABS plastic (resists cracks from rocks, bumps, and UV rays)
Flexible yet rigid: Bends slightly to absorb minor impacts without breaking
Weather-sealed surface: Repels rain, mud, and grass clippings; prevents fading in sunlight
2.Precise & Functional Design
Custom-molded to match rear hood seat and wheel well shapes (fits EZ-GO, Club Car, Yamaha models)
Extended coverage: 5–8cm overhang beyond the wheel well to block debris spray
Smooth, rounded edges: Eliminates sharp corners to avoid scratches on passengers or gear
3.Easy Installation & Compatibility
Bolt-on or clip-on mounting: Uses pre-drilled holes on the rear hood seat frame (no extra drilling)
Includes all hardware (screws, washers, gaskets): Ensures tight, rattle-free attachment
Universal fit for standard golf cart rear wheel sizes (10–12 inches): No size modification needed
II. Product Functions
1.Debris & Spray Protection | Blocks mud, water, and grass from being kicked up by rear wheels onto the rear hood seat or passengers Shields the rear hood seat's lower edges from scratches caused by rocks or gravel Prevents debris from accumulating in the gap between the rear seat and wheel well (reduces cleaning effort) |
2.Structural & Passenger Safety | Reinforces the connection between the rear hood seat and the cart's chassis (adds stability to the seat assembly) Acts as a barrier to prevent small items (e.g., golf balls, tees) from falling into the wheel well Protects passengers' legs/feet from accidental contact with the rear wheel (especially for rear-seat riders) |
3.Aesthetic & Practical Enhancement | Covers gaps between the rear hood seat and wheel well (creates a sleek, unified rear-end look) Hides minor wear or rust on the cart's rear wheel well edges (refreshes the cart's appearance) Easy to clean: Smooth plastic surface wipes off dirt or mud with a damp cloth in seconds |
Ⅲ.Product dimensions
Length: 670mm
Width : 130mm
Height: 65mm
FAQ
1.Q: Why does the rear fender flare come loose?
A: Tighten its attachment bolts to the seat frame; replace cracked mounting clips.
2.Q: How to fix a broken rear fender flare?
A: Use plastic repair glue for small splits; replace if damage affects mud protection.
3.Q: Can any rear fender flare fit my cart’s rear cover seat?
A: No, choose one matching the seat’s width and your cart’s make/model.
4.Q: How to clean dirt from the rear fender flare?
A: Wipe with a damp cloth; use a soft brush for stuck-on mud—avoid sharp tools.
Rear fender flare R and L
Product profile
The golf cart rear hood seat component rear fender flare is a dedicated protective and structural accessory. It's designed to attach to the side of t rear fender flare he rear hood seat assembly—covering the upper and outer edge of the rear wheel well. This component bridges the gap between the rear hood seat and the rear wheel, shielding both the cart's body and passengers from debris while complementing the rear hood seat's design. Unlike generic fender flares, it's tailored to the contours of rear hood seat assemblies, ensuring a seamless fit that doesn't disrupt seat folding or hood operation.
I. Product Features
1.Durable & Impact-Resistant Material
Made of high-density polyethylene (HDPE) or ABS plastic (resists cracks from rocks, bumps, and UV rays)
Flexible yet rigid: Bends slightly to absorb minor impacts without breaking
Weather-sealed surface: Repels rain, mud, and grass clippings; prevents fading in sunlight
2.Precise & Functional Design
Custom-molded to match rear hood seat and wheel well shapes (fits EZ-GO, Club Car, Yamaha models)
Extended coverage: 5–8cm overhang beyond the wheel well to block debris spray
Smooth, rounded edges: Eliminates sharp corners to avoid scratches on passengers or gear
3.Easy Installation & Compatibility
Bolt-on or clip-on mounting: Uses pre-drilled holes on the rear hood seat frame (no extra drilling)
Includes all hardware (screws, washers, gaskets): Ensures tight, rattle-free attachment
Universal fit for standard golf cart rear wheel sizes (10–12 inches): No size modification needed
II. Product Functions
1.Debris & Spray Protection | Blocks mud, water, and grass from being kicked up by rear wheels onto the rear hood seat or passengers Shields the rear hood seat's lower edges from scratches caused by rocks or gravel Prevents debris from accumulating in the gap between the rear seat and wheel well (reduces cleaning effort) |
2.Structural & Passenger Safety | Reinforces the connection between the rear hood seat and the cart's chassis (adds stability to the seat assembly) Acts as a barrier to prevent small items (e.g., golf balls, tees) from falling into the wheel well Protects passengers' legs/feet from accidental contact with the rear wheel (especially for rear-seat riders) |
3.Aesthetic & Practical Enhancement | Covers gaps between the rear hood seat and wheel well (creates a sleek, unified rear-end look) Hides minor wear or rust on the cart's rear wheel well edges (refreshes the cart's appearance) Easy to clean: Smooth plastic surface wipes off dirt or mud with a damp cloth in seconds |
Ⅲ.Product dimensions
Length: 670mm
Width : 130mm
Height: 65mm
FAQ
1.Q: Why does the rear fender flare come loose?
A: Tighten its attachment bolts to the seat frame; replace cracked mounting clips.
2.Q: How to fix a broken rear fender flare?
A: Use plastic repair glue for small splits; replace if damage affects mud protection.
3.Q: Can any rear fender flare fit my cart’s rear cover seat?
A: No, choose one matching the seat’s width and your cart’s make/model.
4.Q: How to clean dirt from the rear fender flare?
A: Wipe with a damp cloth; use a soft brush for stuck-on mud—avoid sharp tools.
